Piranha P-90 Single Operator Ironworker

$29,900.00

Compare
Category:

Description

Piranha P-90 Single Operator Ironworker The Piranha Model P-90 picks up where the P-65 leaves off for applications requiring more tonnage. The P-90 has more standard workstations than any other ironworker in its class. This includes punching, bending, bar shear, angle shear, round bar shear, and an integrated coper/notcher. The P-90 also has a dovetail slide that allows an operator to switch from punching to bending in just a few seconds (watch the video) Furthermore, the P-90 has full electrical control of its stroke with a footswitch and limit switch stroke controls. The no slug-loss shearing saves material, keeps the machine area cleaner, and offers larger material capacity than the competition. A wide variety of optional tooling is available to enhance the P-90’s capabilities. Piranha’s incomparable integrated coper/notcher station outperforms any other ironworker. Notch from thick to thin, remove the full leg from angle iron, shave even the smallest piece from the end of the work piece, and maintain total control of the part from any angle. So, when comparing ironworkers, look at the complete package. Standard Features Complete Punching Attachment with split dove tail mounting 5 Punch and Die sets Automatic Urethane Hold Down on the Punch Stripper and on Angle Plate and Bar Shear Front and rear 5 position joy stick controls (electric) with jog up & down, fast up & down, neutral Remote Electric Foot Switch that can be connected at either end of the machine Electric Limit Switches that can be set for stroke control when using foot control Set of Round Bar Knives [2 way] (customers choice to 2) Set of 14.50 Plate Shear Knives [4 way] Extra Blank Knife to extend shear to 18″ Set of Angle Knives [8 way top] [4 way bottom] Set of Coper Knives [2 way top] [4 way bottom] Chip Buckets (2 each) Extra Oil Filter Coupling Wrench & 3/8″ Allen Wrench Integral Lifting Lug for instant portability P-90 Capacities & Specifications Compare capacities & specifications of all ironworkers (pdf) Throat Depth 10″ Coper-Notcher (Tons)(Max.) 753-1/2″ x 5″ x 3/8″ Open Height 15″ Bending Attachment(Optional) 12″, 24″ Closed Heightw/o Die Block 10-1/8″ Punch End Strokes Per MinuteOptional Speed-Up Kit32 @ 3/4″45 @ 3/4″ Stroke Length 4-7/8″ Work Station HeightApprox. 42″ Platen Table Size (D-W) 12″ x 21″ HydraulicsPump GPMSystem R/V PSI 10.52900 PunchHole Size (Max. Material)Max. Hole Size (Material) 90 Tons1-1/8″ (1″)5″ (3/16″) Fluid Capacity (gal.) 25 Plate Shear 18″ Long1″ x 8″3/4″ x 12″1/2″ x 18″Motor Std. 230/460 3 Ph.1800 RPMOpt Phase & Voltage Available 10 HP 3 Ph. Angle Shear 5″ x 5″ 1/2″ Dimensions (Net)W-L-H Approx. 31″ x 79″ x 64″ Bar ShearRound (min. to max.)Square (min. to max.) 1/2″ to 2″1/2″ to 1-3/8″ Weight (Net)Lbs. Approx. 4250

Additional information

Condition

New